14 Proven Ways To Fix Your Monitor Speakers Not Working! – No Sound? No Problem!

If you are having problems with your monitor speakers not working, there are a few things you can do to try and fix the issue. They are:

  • Restart Your Computer
  • Enable Audio Through BIOS
  • Check The Cable Connections
  • Check the Audio Output Settings
  • Confirm HDMI Audio Is Selected
  • Replace The Faulty Sound Card
  • Run Audio Troubleshooter
  • Update Sound Drivers

In this blog post, I will outline some of the most common fixes for this problem. So, if your monitor speakers are not working, read on for some valuable tips.

10 Common Reasons For My Monitor Speakers Not Working

  1. The volume on the computer is muted or set too low.
  2. The audio cable is not plugged in correctly.
  3. The audio driver is not installed or needs to be updated.
  4. There is a problem with the sound card.
  5. The speakers are not turned on.
  6. The speakers are defective.
  7. The sound settings in the operating system are not configured correctly.
  8. There is a problem with the sound driver.
  9. There is a problem with the sound codec.
  10. The sound settings in the software program are not configured correctly.

14 Ways To Fix Your Monitor Speakers Not Working

If you are facing severe sound issues with your computer monitors, like no sound or faint sound and noise, then you can try the below-described way to fix it!

1. Restart Your Computer

reset this pc

If your computer’s monitor speakers are not working, you can restart your computer. This will usually fix the problem.

  1. Shut down your computer.
  2. Unplug the power cord from the back of the computer.
  3. Wait for 30 seconds.
  4. Plug the power cord back into the back of the computer.
  5. Turn on your computer.

There is another method to do this:

  • To restart your computer, press the “Ctrl” + “Alt” + “Delete” keys on your keyboard at the same time.
  • This will bring up the Windows Task Manager.
  • You can click on the “Restart” button to restart your computer.

2. Enable Audio Through BIOS

Sometimes there may be an issue with your BIOS settings, and you can enable the monitor’s audio through the BIOS. To do this, follow these steps:

  1. Enter the BIOS. This can be done by pressing the F2 key during startup.
  2. Navigate to the “Advanced” tab.
  3. Select “Onboard Devices.”
  4. Enable the “Audio” option.
  5. Save your changes and exit the BIOS.

If these steps do not work, you may need to enable audio through the Windows Control Panel.

3. Check The Cable Connections

cable connection

If your monitor speakers still aren’t working, check the cable connections. Ensure that the audio cable is securely connected to the monitor and computer.

Also, check that the volume on your computer is turned up. If you’re using headphones, make sure they’re plugged in, and the volume is turned up.

If you’re using external speakers, check that they’re turned on and the volume is up. Similarly, ensure that the speakers are correctly plugged into an outlet and the audio port on the back of your computer.

4. Check The Volume Of The Built-In Speakers

If you find that the volume of your computer’s built-in speakers is too low, there are a few things you can do to try and fix the issue.

Before we get into those, however, it’s essential to ensure that your computer’s volume is turned up.

To do this, look for a small speaker icon in your system tray (the area next to the clock in the bottom-right corner of your screen), and make sure that the volume slider is turned up.

5. Check The Audio Output Settings

You can do this in 3 different ways.

1. Check If The Audio Output Settings Are Set To The Correct Output Device.

If your computer has multiple audio output devices, you may need to check that the audio output settings are set to the correct device. To do this:

  • On Windows 10, right-click the speaker icon in the taskbar and select “Open Sound settings.”
  • On the “Output” tab, check that the correct output device is selected.

Check The Audio Output Settings

2. Check If The Audio Output Device Is Set As The Default Device

If the audio output device is not set as the default device, you will not be able to hear any sound from it. To set an audio output device as the default device:

  • On Windows 10, right-click the speaker icon in the taskbar and select “Open Sound settings.”
  • On the “Output” tab, click on the audio output device you want to set as the default device and then click on the “Set as default device” button.

Audio Output Device Is Correctly

3. Check If The Audio Output Device Is Correctly Configured

If the audio output device is not configured correctly, you will not be able to hear any sound from it. To check and configure an audio output device:

  • On Windows 10, right-click the speaker icon in the taskbar and select “Open Sound settings.”
  • On the “Output” tab, click on the audio output device you want to configure and then click on the “Device properties” button.
  • On the “Advanced” tab, check that the audio quality is set to at least 24-bit, 44100 Hz (CD Quality).

Audio Output Device

6. Confirm HDMI Audio Is Selected

To check if HDMI audio is selected as the default playback device on your computer, you can follow these steps:

  • Open the “Sound” Control Panel applet.
  • In Windows 10, you can do that by right-clicking the sound icon in the notification area and selecting “Open Sound settings.”
  • In the “Sound” Control Panel applet, under the “Playback” tab, look for an entry called “HDMI output.”
  • If it’s not there, then HDMI audio is not enabled on your computer.
  • If the “HDMI output” entry is there, right-click it and select “Enable” from the context menu.
  • Once it’s enabled, you should be able to hear sound from your monitor speakers.

Confirm HDMI Audio Is Selected

7. Replace The Faulty Sound Card

A faulty sound card can also be the reason for no sound on your monitor. Try to replace the sound card if it is found faulty or damaged.

To replace the sound card, follow these steps:

  1. Turn off the computer and unplug all cables from the back.
  2. Remove the sound card from its slot in the motherboard.
  3. Insert the new sound card into the same slot.
  4. Connect all cables to the back of the computer.
  5. Turn on the computer and test the speakers.

8. Run Audio Troubleshooter

You can also try running the audio troubleshooter to fix the problem. To do this, follow these steps:

  1. Press the Windows logo key + I on your keyboard to open the Settings app.
  2. Click on Update & security.
  3. Click on the Troubleshoot tab.
  4. Under the Hardware and Sound section, click on Playing audio.
  5. Click on Run the troubleshooter.

The troubleshooter will now try to detect and fix any problems with your audio playback. If the troubleshooter cannot fix the problem, you may need to update your audio drivers.

Run Audio Troubleshooter

9. Update Sound Drivers

If you’re having audio issues, it’s always worth checking your sound drivers to see if they need updating. Here’s how to do it in Windows 10.

  1. Right-click the Start button, then click Device Manager.
  2. In Device Manager, go to the Sound, video, and game controllers section.
  3. Find your sound card or audio device in the list and right-click it.
  4. Click Update Driver.
  5. In the Update Drivers window, choose to Browse my computer for driver software.
  6. Click Let me pick from a list of available drivers on my computer.
  7. Find the driver you want to install, then click Next.
  8. Click Install.
  9. Restart your computer if prompted.

Update Sound Drivers

10. Update Monitor Drivers

If your monitor speakers are not working, the drivers are likely outdated. Drivers are small software that allows your hardware to communicate with your operating system. Outdated drivers can cause various problems, including hardware not working properly.

To update your monitor drivers:

  1. Download and install Driver Easy.
  2. Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.
  3. Click the Update button next to your monitor to download the latest and correct driver.

Note: You can also click Update All to automatically download and install the correct version of all the missing or outdated drivers on your system.

  1. Restart your computer for the changes to take effect.

11. Update Windows Or macOS

If your monitor speakers are still not working, you may need to update your Windows or macOS. To do this, follow these steps:

  1. Open the Windows Update utility by clicking the Start button
  2. Then click Control Panel, then select System and Security.
  3. In the left pane, click Check for updates.
  4. If any updates are available, install them and restart your computer.
  5. Once your computer has restarted, try playing sound through your monitor speakers again.

12. Try To Roll Back The Updates

Windows Update

If you have updated your Windows 10 and the audio on your monitor speakers is not working, don’t worry. You can easily roll back the updates and get your audio working again. Here’s how:

  • Press the Windows key + I to open the Settings app.
  • Click Update & Security.
  • Click the Recovery tab.
  • Under “Go back to an earlier build,” click Get started.
  • Follow the prompts to roll back your Windows 10 update.

After you’ve rolled back the updates, restart your computer.

13. Switch to ChromeOS

When you are using a Chromebook, and your monitor speakers are not working, you can switch to ChromeOS by following these steps:

  1. Click the “Start” button in the lower-left corner of your screen.
  2. Type “chrome://flags” into the search bar.
  3. Find the “Enable monitor speakers” flag and change it to “Enabled.”
  4. Restart your computer.
  5. Enjoy your new ChromeOS monitor speakers!

14. Lastly, Disable Audio Enhancements

If you have done all of the above and your monitor speakers are still not working, try disabling any audio enhancements that may be enabled.

To do this,

  • Right-click on the speaker icon in the notification area of your taskbar
  • Select “Playback Devices.”
  • In the Playback Devices window,
  • Select the speaker you are trying to use and click “Properties.”
  • In the Properties window, go to the “Enhancements” tab
  • Check the box next to “Disable all sound effects.”
  • You may also want to try other options on this tab, such as “Loudness Equalization.”
  • Click “OK” to save your changes and close the window. Your monitor speakers should now be working.

How To Fix No Sound Over HDMI?

If you are experiencing issues with sound not coming through your HDMI connection, there are a few things that you can try to fix the problem.

First, check to ensure that the HDMI cable is properly plugged into the TV and the device you are trying to use it with.

When the cable is properly plugged in and you are still not getting any sound, try restarting the TV and the device you are using.

If you still have issues, you can try connecting the HDMI cable to a different port on the TV. If this works, the problem is likely with the port you initially used.

Lastly, If you have tried all of these things and are still not getting any sound, there may be an issue with the HDMI cable itself. Try using a different HDMI cable to see if that fixes the problem.

How To Fix Monitor Speakers Are Not Working With Displayport?

If your monitor speakers are not working with DisplayPort, there are a few things you can try to fix the issue:

  • First, ensure that the speakers are turned on and properly connected to the DisplayPort connection.
  • When the speakers are still not working, try resetting the speaker system by unplugging it from the power source and then plugging it back in.
  • If the speakers are still not working, try another DisplayPort cable to see if the issue is with the cable.
  • Lastly, when the speakers are still not working, contact the manufacturer of the speakers for further troubleshooting assistance.

Frequently Asked Questions

Do Monitors Have Sound?

Many monitors do not have built-in speakers, even though some do. Incorporating speakers inside a monitor is an extra expense for the manufacturer, much as wireless headphones.

Why Does My Sound Not Work When I Plug In A Monitor?

Corrupt or missing audio drivers may blame your HDMI no sound issues. You may be able to resolve the issue by running a sound driver upgrade. It is possible to download the correct sound card drivers manually or automatically.

How Do I Get My External Monitor To Play Sound?

Sound Control Panel may be found in the Related Settings section in the upper-right-hand corner and is accessible by clicking on it. This will cause a new window to appear. You’ll find a few settings on the Playback tab. Additionally, speakers and an external display option should be included in this set.

How Do I Enable HDMI Audio On My Monitor?

  1. To open Run, press Windows + R.
  2. Open the sound and audio device settings window by typing mmsys.cpl and pressing enter.
  3. The playback tab may be found there.
  4. When an HDMI audio device is deactivated, right-click on it and choose “Enable” to make it active.

Does My Monitor Have Speakers Test?

Select Display Audio as your playback device in your Control Panel’s Sound section. Make sure your sound isn’t muffled or low by doing a quick sound test.

To accomplish this, choose Configure and then Test from the menu. Rebooting the computer may be necessary for specific settings while clicking the Okay button will suffice for others.

Do You Connect Speakers To PC Or Monitor?

If the monitor includes speakers or a 3.5mm stereo in/out pass-through, you may send audio over HDMI or DP to the monitor.

If you have a monitor with a 3.5mm stereo output, you can connect headphones or speakers to get audio from your HDMI/DP source to an external audio device.

Can A Headphone Jack Be Used For Speakers?

The maximum and minimum impedance values for speaker and headphone ports might vary depending on the computer’s hardware, but generally, there is a difference between the two ports.

Why does my monitor’s audio sound distorted or crackly?

Distorted or crackly audio can be caused by a number of factors, such as a damaged audio cable, a loose connection, or interference from nearby electronic devices. Try checking and adjusting the connections and moving any electronic devices away from the monitor.

Can I use external speakers with monitor if the built-in speakers are not working?

Yes, you can use external speakers with your monitor by connecting them to the audio output on your computer or by using a USB audio adapter.

Why is there no sound coming from my monitor when I connect it to my laptop?

If you’re connecting your monitor to your laptop using an HDMI cable, it’s possible that the audio output is still set to the laptop’s built-in speakers. To fix this, go to your sound settings and select the monitor as the default audio output device.

How do I test if my monitor speakers are working?

test if my monitor speakers are working

You can test if your monitor speakers are working by playing an audio file or video with sound and checking if you can hear it from the speakers. You can also try adjusting the volume or checking the sound settings to ensure that the speakers are enabled and set as the default audio output device.

Can a faulty graphics card affect the sound on my monitor?

No, a faulty graphics card should not affect the sound on your monitor since the graphics card is responsible for displaying images on the screen and not for producing sound.

Why is there no sound coming from my monitor when I connect it to my gaming console?

If you’re connecting your monitor to your gaming console using an HDMI cable, it’s possible that the audio output is still set to the console’s built-in speakers. To fix this, go to your console’s sound settings and select the monitor as the default audio output device.

Finally, Can Bluetooth Headphones Be The Problem?

Sometimes, a Bluetooth headset can be the reason for your monitor speakers not working. When using a Bluetooth headset, try to connect it to another device to see if it is a problem.

If the headset is not the problem, then you may need to adjust the settings on your computer or monitor. Check the volume on your computer and ensure it is turned up.

You can also try to adjust the settings in the “Sound” control panel. If you still cannot get the speaker to work, you may need to replace it.

Share :